wiring a ceiling fan with light with two switches

Connect the black wire from the box to the black wire from the light fixture with a wire nut. To remove the backstab wires, shove a small screwdriver into the slot by the wires and put the wire out.Īt the ceiling box, remove the red wire and wire nut it. Now mount the switch and get a cover similar to the one shown below. Ground the switch with a piece of #14 wire. Remove the other black wire from the backstab at the other end of the switch and bend a shepherd's hook on the stripped wire and screw it to the other terminal on the new switch.

Pigtail them with a small piece of black wire and connect it to the new switch. Remove the black wire loop from the switch screw terminal and the wire from the backstab next to it. Now get a new single pole single throw, standard toggle switch since you stated both switches were cracked. Remove the red wire and put a wire nut on it. Remove the two black wires on the red wire switch, one from the screw terminal and one from the backstab and wire nut them together.

Lets eliminate the switch with the red wire.

Wiring a ceiling fan with light with two switches